Alongside the much-vaunted return of the ground effect concept is the revival of wheel rim covers. F1 hopes these will help smooth the turbulence ordinarily created by the wheel and tyre, and thus help reduce the overall wake generated by the lead car when another is chasing.

The rim covers used in 2022 will be a far cry from the complexity of what we’ve seen in the past though, as teams will have little influence in their design – in order that they don’t use them to damage the overall intent of their inclusion.

However, that won’t stop us taking a trip down memory lane to see how and why wheel rim covers have been deployed by teams in the past…

As we can see from Giorgio Piola’s illustration (above), the roots of the wheel rim cover can actually be traced much further back than you might expect. Ferrari experimented with them at Monza in 1990 to reduce drag at the ‘temple of speed’ during qualifying.

The team was unable to use them under race conditions, however, as the brakes would have overheated, given there was nowhere for the heat generated under braking to escape. To make life even more difficult, not only in terms of regulating temperatures but also when needing to change tyres, a retractable panel was installed over the wheel nut.

Ferrari 248 F1 rear rims detail

It would take over a decade for another solution to reappear but, unsurprisingly, it was at Ferrari again. This time it came with a slight twist, as the team introduced a design for the rear wheel of 248 F1 that featured a shallow rim fairing.

Like the covers we’ll see in 2022, the fairing rotated with the wheel – something that was expanded upon later in the season with a cover that took up all but the central section in order to grant access to the wheel nut at pitstops.

Toro Rosso STR01 rim detail

Renault R27 side view Brazilian GP

This idea didn’t go unnoticed though, as can be seen here, with Toyota and Toro Rosso deploying their own variants at Imola and Silverstone respectively. Having previously protested the design, Renault also went on to introduce its own version of the rear wheel rim fairing in 2007 but it was Ferrari who continued to see the merits of using these rim covers to assist its aerodynamic endeavors.

Ferrari introduced an altogether more complex wheel rim cover at the British Grand Prix, one that was static, rather than rotating with the wheel. The cover being static opened up many new opportunities for the team in terms of rerouting the airflow passing through the brake duct assembly, with an aperture created in the lower rear portion of the cover designed to direct the airflow and influence the turbulence created by the wheel and tyre.

Ferrari F2007 front rim detail

Ferrari F2007 front rim detail

This was by no means the simple rim fairing that the team had been using at the rear of the car and had been copied by others. This was a complex system that incorporated several components to help route the internal airflow, including a row of guide vanes, while the entire axle, wheel nut and wheel gun all had bespoke designs to accommodate the new system.

The cover was convex in shape, rather than flat, in order that the airflow passing around the outside of the wheel didn’t have an adverse effect on what the team was trying to do internally.

It didn’t make any dramatic changes to the arrangement going into 2008 but did add a small guide vane across the upper section of the cover to help direct the airflow in that region more effectively.

While Ferrari hadn’t felt the need to alter the design too dramatically, others had taken note and a slew of new designs arrived up and down the grid…

McLaren MP4-23 rim duct comparison

McLaren’s design featured an outlet in the front lower quarter of the wheel rim cover, not the rear. This was obviously a choice based on its different aerodynamic demands and also resulted in designers looking at a variant which also included a forward deflector fence to help direct the turbulence.

Honda RA108 2008 front wheel cover

Honda’s version included the rearward outlet position, albeit a little larger but, interestingly, had a small overlapping deflector in the lower forward corner too.

BMW Sauber introduced its version in Monaco, which fell somewhere in the middle, literally, with the outlet placed right in the middle.

Toyota TF108 rear wheel cover

Toyota turned things up from a design perspective at the rear of the TF108 when it introduced a fan-like cover at the Spanish Grand Prix.

The regulation changes introduced in 2009 didn’t overturn the teams’ ability to use wheel rim covers and, despite the overall aerodynamic overhaul that ensued, they opted to use them as a means of altering the wheel wake turbulence.

Those aerodynamic changes did result in the teams having to optimise their pre-existing designs, while others developed new, more complex versions... 

Ferrari F60 rim duct detail

For Ferrari, that resulted in the outlet being adjusted to take a more dominant location at the front of the wheel cover, while a deflector was added in the top corner.

Brawn BGP 001 front rim cover

When thinking of wheel rim covers, perhaps the Brawn BGP001 is the car that first springs to mind – its fluorescent yellow rim covers truly stood out, whereas everyone else tended to leave theirs blank or simply replicate the wheel rim design beneath.

Force India VJM02 2009 front brake detail

Force India’s front wheel rim cover was more of a wedge-shaped affair that had a forward projected deflector.

Force India VJM02 2009 rear wheel cover

At the rear of the Force India, a fan-like wheel rim cover was deployed – similar to the one we’d already seen on the Toyota the previous year.

The sport opted to ban wheel rim covers from 2010 onwards, as not only had they contributed towards the overall failure to improve overtaking that the 2009 regulations had set out to accomplish, they were also an extremely costly solution, which seemed far to lavish to ignore at a point when teams were looking to rein-in spending.

Even without those misgivings, there had also been several failures and pitstop incidents that contributed to their demise on safety grounds.

Ferrari wasn’t entirely done with trying to improve flow around the front wheel assembly though, as even without the rim covers it found a way to adjust the airflow’s behaviour. It added a pair of hoops on to the wheel rim design for 2010 (above), which other teams were unable to copy as the wheels were a homologated component.

George Russell, Mercedes W10 mule

Photo by: Mark Sutton / Motorsport Images

Seen here on the Mercedes W10 mule car, which was designed to accept the larger 18-inch rims that will feature on the 2022 cars, these are the wheel rim covers that teams will use going forward.

The dished design is a compromise that erodes some of the aerodynamic inefficiencies created by the wheel and tyre, while also making them as easy as possible for the mechanics to handle during pitstops.

Piastri: "2022 won't be wasted year" as Alpine F1 reserve

Alonso: "Luxury" to leave and return to F1 on my own terms

What are the new F1 technical rules for 2023 and why do they keep changing?

Hungarian GP: Latest F1 technical images from the pitlane

Tech breakdown: Under the skin of the new Mercedes

The Top 10 Shootout for the Repco Bathurst 1000 has been cancelled due to torrential rain at Mount Panorama.

Live: Follow Japanese GP qualifying as it happens

Follow along for minute-by-minute updates for FP3 and qualifying ahead of Formula 1's Japanese Grand Prix.

Why Red Bull freedom and an Alpine switch can define Gasly's F1 career

After seemingly being stuck in limbo at AlphaTauri - too good to let go, but not a realistic prospect for a Red Bull return - Pierre Gasly has finally shaken off the shackles to join Alpine. A fresh start at the French team should do Gasly the world of good, but he must adapt quickly. Oh, and work with a team-mate with whom he's had a fractious relationship...

AlphaTauri: Italian GP debut key to choosing de Vries

AlphaTauri team boss Franz Tost admits that that Nyck de Vries’s strong Formula 1 debut in the Italian Grand Prix was the key to the Dutchman landing a 2023 seat with the team.

Why Red Bull freedom and an Alpine switch can define Gasly's F1 career

After seemingly being stuck in limbo at AlphaTauri - too good to let go, but not a realistic prospect for a Red Bull return - Pierre Gasly has finally shaken off the shackles to join Alpine. A fresh start at the French team should do Gasly the world of good, but he must adapt quickly. Oh, and work with a team-mate with whom he's had a fractious relationship...

The relaxed home life that helps F1’s Kevin Magnussen to deliver

The unrelenting grasp of the tax man prompts most racing drivers to move to the likes of Monaco, Switzerland or Dubai. But, as Oleg Karpov found out, Kevin Magnussen is quite happy where he is, thank you very much – at home, with his family, in Denmark

How Perez has shown what many F1 drivers need from the 2022 season run-in

OPINION: Sergio Perez’s Singapore triumph arrested a big decline in his Formula 1 performances against Max Verstappen at Red Bull since his Monaco win. He now needs to maintain his form to the season’s end, while others are also seeking a change in fortunes.

How the FIA should punish any breaches of the F1 cost cap

OPINION: On Wednesday, the FIA will issue F1 teams with compliance certificates if they stuck to the 2021 budget cap. But amid rumours of overspending, the governing body must set a critical precedent. It needs to carefully pick between revisiting the bitterness of Abu Dhabi, a contradictory punishment and ensuring parity for the rest of the ground-effect era

Singapore Grand Prix Driver Ratings 2022

A testing return to the Singapore Grand Prix in tricky conditions created plenty of hazards and mistakes for the Formula 1 drivers to fall into. That partly explains a number of low scores, including from a handful of high profile runners, allowing others to take a starring role under the floodlights

The two key contributors to Leclerc's defeat to Perez in Singapore

In a marathon Formula 1 Singapore Grand Prix, Sergio Perez’s victory was only assured hours after the race due to a stewards investigation. Throughout the contest the Red Bull driver impressively held off Ferrari’s Charles Leclerc in changing conditions to see the Mexican pull out enough of an advantage to negate his post-race penalty

Why is Oscar Piastri F1's most sought-after rookie?

The Australian rising star is fast, consistent, confident, adaptable and has shown excellent racecraft, but there’s already a taint to his reputation. That hasn’t stopped him becoming the hottest property in this year’s F1 driver market and why McLaren moved fast to snap up the 21-year-old

The unintended benefit that F1's new engine rules era will deliver

Formula 1's incoming engine rules shake-up has multiple targets. But it may also solve what has been a bone of contention since the hybrids arrived in 2014. The new plan will allow the series to pump up the volume